j'ai vu ça sur le forum MEDFISH
L'arbalète est désignée dans le site Rob Allen sous la rubrique : « Vecta Aluminium railgun »Ambush-IL a écrit :what a day.
my freind Tomer and I going for deep water diving, botoom of about 40 m, and diving again for up to 20 m.
Tomer with his the Rob Allen 130 attached to a float and not to a reel due to big fish in the area.
in the first dive of the day i see him chasing his float and screaming to me to get into the boat and follow the float.
went tot he boat, picking Tomer into the boat and beging followiing the float which was way more than 100 m away.
after 200-300 m the fish got tired tomer went down with another gun and finished the job.
i helped him get the fhish to the boat and head to shore.
a monster 36.6 Kgs of King Mackrel on spearfishing.
i think its a Med record. it is the biggest one cought in Israel.
Les parois du tube ont une épaisseur de 1,45mm, et le rail est intégré, ce qui améliore la rigidité.
3 modèles de 07m à 1,4m : ici, c'est le modèle de 130 qui m'intéresse.
Sparid : flèche de 6,6mm 1 sandow de 16mm
Caranx : flèche de 7mm, 1 sandow de 19mm
Tuna : flèche de 7,5mm, 2 sandows de 16mm
D’après la photo, il s’agit du modèle Caranx …
Rob Allen : la marque a une réputation de solidité, et ses flèches ont un talon Européen.
Mais qu’en penser par rapport à un Marlin (Beuchat) ?
Et par rapport à Aimrite (de Hawaï) dont le mécanisme est paraît-il très solide,
et qui utilise les flèches de 6,6, 7 et 7,5mm de Rob Allen ?
Je pense au montage suivant : crosse Marlin + tube en carbone Beuchat 130 cm+ flèche de 7,5mm à ergots + 2sandows de 16mm.
Mais est-ce que ce serait équilibré et neutre sous l’eau ?